Gefen Large HDMI Matrix IP/Serial Driver by Domosapiens

MSRP: $110.00
[Sign in for more info]
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

DOMOSAPIENS IP/SERIAL DRIVER FOR LARGE GEFEN HDMI MATRIX SWITCHES (UP TO 32x32)

This driver allows you to control a supported GEFEN HDMI matrix switch (up to 32x32) from Control4.

HDFST: support is provided for the GEF-HDFST-MOD-32432-HD, GEF-HDFST-MOD-32432-HDELRGEF-HDFST-MOD-16416-HD and GEF-HDFST-MOD-16416-HDELR.

IMPORTANT: ensure your matrix switch is at the most recent firmware level.

No posts found

Write a review

INSTALLATION INSTRUCTIONS 

  • Use the free trial period or activate the driver at any time by assigning to this project the license you purchased from the driverCentral website (requires the driverCentral cloud driver). 
  • Ensure the GEFEN switch firmware is at the most recent level. 
  • Select the right GEFEN Matrix Model property. THIS IS IMPORTANT, as models have slightly different commands and responses. 
  • When using IP control, set the GEFEN switch to a static IP address or ensure it always receives the same IP address from the DHCP server via a MAC-based reservation. Enter the IP address in the Connections area. 
  • When using Serial control (by itself or as a backup to IP control), make the appropriate Serial connection. If both are connected and IP fails, the driver will use serial and revert back to IP when restored. 
  • Connect the HDMI inputs and outputs as well as room controls as appropriate. If your actual matrix switch supports less than 32 inputs or outputs, connect only the appropriate bindings, starting at 1.