Platforms

Lists all the different platforms the marketplace supports

MSRP: $129.00
Control4, Current Driver Version: 1014
Integrate via WiFi Connector Bridge to Control4 system and control all blinds addressed on connector system

Minimum quantity for "Connector Blind RF433Mhz and Dooya Bridge" is 1.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $70.00
Control4, Current Driver Version: 1010

Enables you to manage the state of Control4 Contact Sensors via programming.  This allows you to set and use Contact Sensors from many different sources which cannot be directly connected.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $45.00
Control4, Current Driver Version: 1

This driver is a simple convertor that allows you to use a Contact Sensor Input (like from a Controller, Z2IO, Z2C, etc….) within Composer and get a Keypad Connection output.

Features

  • Quickly bind the contact connection
  • Quickly bind the corresponding keypad connection to a device (like the Toggle of a light)
  • Should mimic a keypad button press including the push and hold to dim a light.
  • Contact Connection 1 is linked to Keypad Connection 1, and so on…

Properties

  • Device Settings
    • Click Rate: This is where you set the click rate to differentiate from a quick click (single tap) or a longer push and hold

Connections

    • 20 Contacts Inputs: This is where you will bind the driver to devices like the contact on a controller, IO Extender, Z2IO or Z2C (or similar)
    • 20 Keypad Inputs: This is where you will bind the driver to a device like you would a keypad button

FAQ

  • Can you give us some examples of how we could use this driver?
    • We have had some requests were an old, centralised lighting system is being changed and need to use existing switchgear. This allows for pulse, press, release inputs to a contact so that the existing switchgear acts as if it were a keypad button
  • Can you have more than one Driver per project?
    • Sure can.
  • Can you bind multiple connections to a contact connection?
    • Nope.
  • Can you bind multiple connections to a keypad connection?
    • Nope.
  • What if I have 2 buttons that need to control one light
    • You can bind the one contact to a connection and then connect to other to another contact connection. The corresponding keypad connections can both be bound to the toggle connection of the light.
  • I want to try before I buy…
    • No problem, the driver comes with a free 15-day trial
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $30.00
Control4, Current Driver Version: 20220815

The Contact Us webview driver for Control4 provides dealers with a professional looking contact us page on the T3 touchscreen with customisable company logo, company contact details, google map and clickable URL to the company website.

This adds the final touch to a professionally installed system and provides dealers with a cheap way of marketing their company to people who utilise the touchscreen.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $100.00
Control4, Current Driver Version: 20221215

ControlByWeb manufactuer IP enabled inputs, sensors & outputs. Integration into Control4 enables Control4 to monitor and control these inputs and outputs

MSRP: $100 USD

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $179.00
Control4, Current Driver Version: 1011

4Drivers has driver to make a seamless integration with tese Biometric readers

You can:
Import all users
Choose actions for each one
Open relay if connected to solution

Try this easy integration and robust solution on you project

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $300.00
Control4, Current Driver Version: 20200618

Homemation – Crestron Lighting Driver

This is a two-way driver between Control4 and Crestron. This is to be used in combination with the Creston Module written.

Secondary Drivers: 

  • To add dimmable lighting loads to the system, use the "HM Dimmable Light" driver.
  • To add switched lighting loads to the system, use the "HM Non Dimmable Light" driver.
  • To use a relay with non-lighting loads, use the “HM Relay Interface” Driver which allows you to connect a Control4 Relay Driver so that it reflects in the correct place on a Navigator.
  • To use a keypad button from Crestron within Control4 you can use the “HM Keypad” Driver. Each button requires an address from Crestron. You can then bind these in connections or use them in programming.

 

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $200.00
RTI, Current Driver Version: 8
Overview: This RTI driver provides two way interface between RTI and Crestron Automation System via Crestron websocket driver. Features:...
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $50.00
Control4, Current Driver Version: 24010501
Overview Like you already know, Control4 has an icon-based user experience. That is pretty good in most cases, but sometimes we need to be able to...
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $90.00
Control4, Current Driver Version: 20220826

Control4 supplies the wireless outlet switch that makes any household plug-in device, like lamps, appliances and electronics part of the Control4 system by turning a standard outlet into a smart outlet.

Unfortunately this device is not available to the majority of the world as it only supports 120VAC voltage for US plug type devices.

Introducing the D-Link Smart Plug. It has plug types for different regions and is extremely affordable. This WiFi based power outlet supports up to 10amps (100-240VAC) and can be easily integrated into the Control4 home automation system using the Chowmain D-Link Smart Plug driver.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $75.00
Control4, Current Driver Version: 20221205

Dahua, who is a popular surveillance manufacturer, produce a range of PTZ and NON PTZ based IP cameras for a range of residential and commercial applications along with network video recorders (NVRs). As one of our top requested drivers we felt that we needed to create the ultimate Dahua driver for Control4.  We have worked closely with Dahua to ensure that the integration provides the best user experience possible.  This driver pushes the integration of Dahua by offering functionality that allows the cameras to push the boundaries of security and home automation.  This means that surveillance is no longer just for security but can also be used to trigger motion-based programming like lighting.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $149.00
Control4, Current Driver Version: 20220729
Integrate the Dahua NVR and cameras with Control4.
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $200.00
Control4, Current Driver Version: 20230807

The Daikin Airbase BRP15B61 lets you control your Daikin ducted or SkyAir system via apps on your phone or tablet.  This module is easily can be easily retrofit without installation of new wiring as it is powered by (and communicates via) the Daikin P1 and P2 bus terminals and communicates via wifi.

Thanks to Chowmain the Airbase is now integrated into Control4 for full two way control and feedback over  temperature, HVAC mode, setpoint, fan speed and zone control.  We have also added additional functionality to the driver to handle presets and scheduling internally.

Setup of hardware and driver should take you no more than 30 minutes once you get the hang of it.

Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $150.00
Control4, Current Driver Version: 20221219
The Daikin SkyFi driver for Control4 allows you to integrate Daikin Ducted and Cassette based HVAC systems into Control4 with full two way feedback and control including filter cleaning feedback and multiple zone and timer based control.

MSRP: $150 USD
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.


MSRP: $125.00
Control4, Current Driver Version: 20220831
The Daikin Wifi driver for Control4 allows you to integrate Daikin Split System based HVAC systems with the BRP072A42 module installed into Control4 with full two way feedback and control including fan swing direction, presets and scheduling.

MSRP: $125 USD
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.