Most HVAC installations in the United States are easy as most thermostats utilise a universal standard and as such can be replaced easily by a 3rd party thermostat such as ELAN’s thermostat.
Unfortunately alot of HVAC manufacturers do not utilise this standard and have proprietary closed communications that are specific to that HVAC manufacturer. This makes it extremely cumbersome for ELAN dealers to source a reliable HVAC product and in many countries ELAN dealers do not even bother with HVAC integration because it is just too hard.
Luckily Intesis have released their range of IntesisBox wifi gateways. The IntesisBox allows you to easily integrate HVAC systems into ELAN by retrofitting the IntesisBox gateway into the existing indoor unit. Intesis offer two gateway types. Specific IntesisBox’s are developed to communicate with the HVAC manufacturer’s proprietary communications protocol allowing for true real time bidirectional communication with the system. Universal IntesisBox’s are developed to offer compatibility with thousands of HVAC models through infra red and offer room temperature feedback via a sensor in the IntesisBox. The universal model also provides feedback when the customer uses the original IR remote to control the HVAC system.
Chowmain’s IntesisBox driver for ELAN will work with all models of IntesisBox and will provide full two way control/feedback.
- Automatic discovery of Intesisbox based on unit MAC address.
- Self healing - if IP address changes the driver will automatically rediscover the unit.
- Temperature Feedback.
- Mode Control/Feedback
- Fan Speed Control/Feedback
- Setpoint Control/Feedback
- Up/Down/Left/Right Vane position control
- HVAC System Error detection and feedback (only on non universal IntesisBox’s).
- Support for multiple AC units (this will work on future IntesisBox hardware – Current version only supports single indoor units).
- Can get feedback when the customer uses the original IR remote for the Universal IntesisBox model.
Why is this product exciting?
In Australia and New Zealand (and other countries) HVAC integration has been hard because HVAC companies do not utilise the honeywell based wiring that most smart thermostats like Nest and Honeywell use. Split Systems have been extremely hard as traditionally they only offer IR or RF based remote controls. In the past we have integrated these systems by learning every combination of IR code however this is extremely time consuming. Also integration for ducted systems and VRF systems were hard because manufacturers have their own propriatary bus.
Now with the IntesisBox installers can now easily integrate HVAC systems into ELAN. The IntesisBox is affordable unlike other solutions so the cost of integration per zone is extremely low. On top of that it communicates via wifi so dealers can now revisit old customers with compatible HVAC systems to upgrade their home automation system and integrate their HVAC systems without additional wiring.
This really changes the HVAC game.
What HVAC systems can i use this driver with?
IntesisBox is compatible with a range of HVAC systems. Please see the Intesis website to check if the HVAC system you want to integrate has a specific IntesisBox or is compatible with the universal IntesisBox. Their website will have the most upto date information about supported models. If you are unsure if you HVAC system is supported please contact Intesis support (email@example.com) and they will advise if you HVAC system is supported and what model IntesisBox you need to purchase
At the time of writing this Intesis have specific bus based IntesisBox make/models for
- Daikin Domestic line
- Daikin Sky and VRV lines
- Fuji Electric Domestic Lines
- Fujitsu Domestic and VRF lines
- General Domestic and VRF lines
- LG Domestic
- LG VRF Lines
- Mitsubishi Electric Domestic, MR Slim and City lines
- Mitsubishi Heavy Industries FD and Hypermulti lines
- Panasonic ecoi and paci lines
- Panasonic etherea domestic lines
- Sanyo ecoi and paci lines
- Toshiba Commerical and VRF Lines
- and more
At the time of writing this Intesis's universal infra red IntesisBox supports the following make/models
- Fuji Electric
- Mitsubishi Electric
- Mitsubishi Heavy Industries
- New Pol
Can i control fan direction with this?
Yes our driver allows for up/down and left/right vane control. This is accessible under the Extras Tab.
Can i do schedule the HVAC system using this?
Yes our driver has built in presets and scheduling.
Where can i purchase this module?
Intesis sells the IntesisBox in over 90 countries. They mainly sell direct. The product has regulatory compliance for Europe, US, Canada and Australia. If you have any sales enquiries please contact Intesis Sales directly via their website or contact them via firstname.lastname@example.org.
Do you offer showroom discounts?
We offer dealers a free showroom licence for demonstration and educational purposes. See link below for T&C's and signup procedure.
I want to try this driver out before buying it?
All Chowmain drivers for ELAN come with a 48 hour trial. This is activated once you add the driver to the project. No additional steps are necessary.
Version #20170512 - 12-MAR-2017
* Initial Release
2.1.3 - Aug 3 2018
Fixed Fan feedback.
Changed from rounding down to rounding up for values.
2.1.2 - Aug 2 2018
Added ability to manually add IP address in for networks that do not allow multicast / broadcast traffic. Once you have added the IP address in press Apply and press the Connect to IntesisBox button
2.1.0 - Jul 25 2018
Updated to latest Chowmain library. Improvements over socket connections, timers, callbacks and more.
2.0.4 - 17-JAN-2017
Updated to support ELAN version 8.2. Note this is a manditory update.
2.0.3 - 2017-NOV-17
Critical Update - If you are on an older version please update
2.0.2 - 2017-OCT-09
Resolved issue where UI would incorrectly feedback offline state
2.0.1 - 2017-OCT-03
Updated to resolve issues with Fahrenheit based feedback and setpoints
Updated to resolve issues with fan state feedback being sent too quickly to core.