Savant Audio/Video Matrix Driver

MSRP: $399.00
[Sign in for more info]
Cinegration LLC
Please sign in to buy

This product cannot be added to the
cart because you are not logged in.

 

 

Integrate the Savant HDMI and Audio matrix switch into Control4!

  • IP Communication
  • Control Savant SLA-3220D and SLN-88BT
  • One driver license for both switches
  • Status, source, output information and adjustment via Driver Properties

Driver is provided by Cinegration LLC.  All rights reserved.

 

No posts found

Write a review

Driver: Savant HDMI Video Switch Driver

Compatible Control4 Systems:  2.9.0
Compatible Hardware: Savant SLN-88BT
Control Platform: IP (Requires Static IP or DHCP Reservation)
Developed by: Cinegration LLC.  www.cinegration.com/drivers

Driver Overview:  Allows control of HDMI matrix switch via IP

Driver Features:

·         IP Ethernet communication

·         Simple driver setup (all you need is the IP Address and you’re ready to go!)

·         Dealer driver polling feature (allows driver to ‘monitor’ what the switch is doing and update Control4 automatically)

·         Video Matrix Features

o    EDID viewing for both inputs and outputs

o    Input Audio Info

o    Adjust the DC Output power for each output

o    Adjust the EDID mode

Description of Items in Driver

  Property List (System Design)

      Driver Version

o      Current Driver version install on project

      Driver Persistence

o      Current saved state of driver data. (note: if this says, ‘Not Saved’ and director reboots, the data will not be available on Load of driver).

  • Driver Information
    • Driver Specific information
  • Debug Mode (Default: Off)
    • Used to view the driver log.  Debug will turn off automatically after 15 minutes
  • Device Connection
    • Current Device State (Online or Offline, Failed to Check in)
  • Polling Timer (Seconds)
    • Amount of time between polling checks.  If 0 then polling is disabled.
  • Firmware
    • Will show the current firmware of the device
  • Adjust Input
    • Allows dealer to adjust certain settings on the input selected
  • Input Info
    • Displays the current Resolution of the input selected
  • Input Audio Info
    • Audio connection for input
  • Adjust Output
    • Allows dealer to adjust certain settings on the output selected
  • Set Output To
    • Change the input on Output selected to input chosen
  • Output Info
    • Shows status information about output
  • Output DC Power
    • Enable/Disable power on output
  • Output EDID Mode
    • Selects EDID mode on Output

Actions Tab (System Design) – This is now located under Property: Driver Actions

Initial Setup/Installation of Driver

 

Savant Switch

  Setup switch and make connections according to standard installation practices

  • Obtain IP

 

  Setup in Driver

  • Enter IP Address in Property
  • Setup connections

About Driver Notes:

     This driver contains code written by Cinegration LLC.  Any modification to this driver without the express written permission of Cinegration LLC will void all warranties, constitute a ban on all drivers released by Cinegration and potentially legal action.

     This driver has been designed to work with Control4 2.9.0 and higher Control4 systems.

 

Warranty:

      Cinegration strives to provide fully working drivers without defects.  However, changes and bugs may be found.  Because of this, any bug/maintenance update to this driver will be free of charge. However, due to the ever-changing nature of computer and audio/video systems, if a new version of the Control4® software creates issues with this driver, or feature enhancements, an upgrade version will be provided for an additional expense or free as determined by Cinegration LLC.

  • 1002
    • migration to driverCentral
  • 1001 (5.1.2017)
    • Official Release of Driver